We help the world growing since 2004

Featured

  • Wholesale Dealers of 15kv/24kv 600a Doadbreak Tt Connector - 25kV 400A Apparatus Bushing – Anhuang

    Wholesale Dealers of 15kv/24kv 600a Doadbreak Tt Connector - 25kV 400A Apparatus Bushing – Anhuang

    Anhuang specialized in Apparatus Bushing, we supply high quality Apparatus Bushing. 24kV 400A Apparatus Bushing provide the interface for the 200A Cable connector and mostly used on the oil-insulated (R-temp, hydrocarbon, or silicon) apparatus, including switchgear, transformers, and capacitors. The Apparatus Bushing are molded using high quality Epoxy Rubber, meet the requirement of standard EN50180/EN50181 DI N4 7636/HN52-S-61 Description Reference No. 25kV 400A Apparatus Bushing AH T...
  • Excellent quality Cold Shrink - lkV low voltage heat shrinkable busbar – Anhuang

    Excellent quality Cold Shrink - lkV low voltage heat shrinkable busbar – Anhuang

    Heat Shrinkable Bus Bar Protective Cover is widely used at the bus bar connection and terminals on the transformer of By using them,it can avoid short circuit,electric shock and to prolong the usage of electrical equipment.Heat Shrinkable Bus Bar Protective Cover is with flexibility,good sealing,water esistance,high and low temperature-resi stance,wear-resistancer requirements.Insulation Class Voltage:1kv Conventional Color:Red,Green,Yellow,Black,Blue,Special color can be customized Widely us...
  • Excellent quality High Voltage Switch - XRNT backup fuse – Anhuang

    Excellent quality High Voltage Switch - XRNT backup fuse – Anhuang

    The magne X interrupter is used in series with low current primary protection devices such as a Bay-o-net Fuse or Magne X The magne X interrupter . The magne X interrupter highly efficient current-limiting section minimizes the effects of high fault current stresses on equipment and the distribution system.Its minimum interrupting rating is coordinated with that of a low current interrupter to avoid undesirable low current operation ; yet its maximum interrupting rating will clear the highest...
  • High definition Cable Accessory - 600A Loadbreak Reducing Tap Plug – Anhuang

    High definition Cable Accessory - 600A Loadbreak Reducing Tap Plug – Anhuang

    Anhuang specialized in Loadbreak Reducing Tap Plug, we supply high quality Loadbreak Reducing Tap Plug. General: 600A/200A Integral Dead break Bushing is used to convert a standard 600A dead break interface to a standard 200A load break interface. Used with a 200A insulated protective cap, M.O.V Elbow Arrester, Grounding Elbow or Load break Elbow Connector, An integral dead break bushing provides a fully shielded. It will be T-Ⅱconnector if connect with T connector. Kit Contents: Loadbreak Re...
  • Good User Reputation for Disconnect Switch - 15kV 630A Specific Junction – Anhuang

    Good User Reputation for Disconnect Switch - 15kV 630A Specific Junction – Anhuang

    Anhuang specialized in Shaped busbar, we supply high quality Shaped busbar. Our products accord with TEEE386, and IEC standards. Our products export widely all over the word. General: 630A Specific Junction provide two, three or four 630A deadbreak 15kV mixed interfaces on one side that are internally bused together and meet all requirements of ANSI/IEEE 386-Separable Insulated Connector Systems. When mated with a comparably rated product, the junction provides a fully shielded, fully insula...
  • Manufacturer of 15kv/24kv 600a Deadbreak T Connector - 25kV 200A Insulated Protective Cap – Anhuang

    Manufacturer of 15kv/24kv 600a Deadbreak T Connector - 25kV 200A Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated P...
  • China Manufacturer for Indoor Vacuum Circuit Breaker - XRNT backup fuse – Anhuang

    China Manufacturer for Indoor Vacuum Circuit Breaker - XRNT backup fuse – Anhuang

    The magne X interrupter is used in series with low current primary protection devices such as a Bay-o-net Fuse or Magne X The magne X interrupter . The magne X interrupter highly efficient current-limiting section minimizes the effects of high fault current stresses on equipment and the distribution system.Its minimum interrupting rating is coordinated with that of a low current interrupter to avoid undesirable low current operation ; yet its maximum interrupting rating will clear the highest...
  • Lowest Price for 12/24kv 630a Separable Elbow Connector - Bushing Well – Anhuang

    Lowest Price for 12/24kv 630a Separable Elbow Connector - Bushing Well – Anhuang

    Anhuang specialized in Bushing well, we supply high quality Bushing well. Our products accord with IEEE386, and IEC standards. Introduction: 15kV/24kV 200A Bushing Well is widely used in the high-voltage circuit of the pad-mounted, submersible transformer, switch gears, etc. A loadbreak bushing insert threads into a universal bushing well to provide the same function as an integral load break bushing. The bushing is used together with the cable accessories such as: bushing insert, Rotatable F...
  • 2020 China New Design Insulation Tube - lkV low voltage heat shrinkable busbar – Anhuang

    2020 China New Design Insulation Tube - lkV low voltage heat shrinkable busbar – Anhuang

    Heat Shrinkable Bus Bar Protective Cover is widely used at the bus bar connection and terminals on the transformer of By using them,it can avoid short circuit,electric shock and to prolong the usage of electrical equipment.Heat Shrinkable Bus Bar Protective Cover is with flexibility,good sealing,water esistance,high and low temperature-resi stance,wear-resistancer requirements.Insulation Class Voltage:1kv Conventional Color:Red,Green,Yellow,Black,Blue,Special color can be customized Widely us...
  • High reputation 12/24kv 630a Apparatus Bushing Insert - 200A Load Break Junctions – Anhuang

    High reputation 12/24kv 630a Apparatus Bushing Insert - 200A Load Break Junctions – Anhuang

    Anhuang specialized in Loadbreak junctions, we supply high quality Loadbreak junctions. Our products accord with IEEE386, and IEC standards. 200A Load break junctions are used in pad-mounted apparatus, underground vaults, and other apparatus to sectionalize, establish loops, taps, or splices, and to facilitate apparatus change outs. Sectionalizing a cable run to find and isolate a cable fault is made easy when a load break junction is used with 15kV class load break elbows. When mated with a ...
  • Excellent quality High Voltage Switch - 35kV Oil-immersed two-position loadbreak switch – Anhuang
  • Well-designed Loadbreak Elbow Connectors - Deadbreak T Rear Connector – Anhuang

    Well-designed Loadbreak Elbow Connectors - Deadbreak T Rear Connector – Anhuang

    Anhuang specialized in Deadbreak T Rear Connector, we supply high quality Dead break T Rear Connector. General: 630A Deadbreak T rear connector can be use together with the T Fore connector and some other back connector, it can be provide more branches, and they can not together with the bushing directly, cover the back protection cap on the end of the blanking cover. Features: ●Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug. ● ...