We help the world growing since 2004

250A Cable Accessories

  • 25kV 250A Straight Connector

    25kV 250A Straight Connector

    Anhuang specialized in Straight connector ,we supply high quality Straight connector. Features: ●Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug. ● Built-in capacitive test point to determine the circuit status or install a fault indicator. ● No minimum phase clearance requirements. ●Mounting can be vertical, horizontal, or any angle in between. Application: • For connection of polymeric cable to transformers, switchgear, motors ...
  • 25kV 250A Load break Elbow Connector

    25kV 250A Load break Elbow Connector

    Anhuang specialized in Loadbreak Elbow Connector, we supply high quality Loadbreak Elbow Connector. Features: l Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug. l Built-in capacitive test point to determine the circuit status or install a fault indicator. l No minimum phase clearance requirements. l Mounting can be vertical, horizontal, or any angle in between. Application: l For connection of polymeric cable to transformers, swi...
  • 25kV 250A insulated protective cap

    25kV 250A insulated protective cap

    Anhuang specialized in Insulated Protective Cap ,we supply high quality Insulated Protective Cap. 25kV 250A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing inter faces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanent or temporary...
  • 25kV 250A extended Apparatus Bushing with skirt

    25kV 250A extended Apparatus Bushing with skirt

    Anhuang specialized in Lengthen Apparatus Bushing, we supply high quality Lengthen Apparatus Bushing. Introduction: 25kV 250A Apparatus Bushing provide the interface for the 200A Cable connector and mostly used on the oil-insulated (R-temp, hydrocarbon, or silicone) apparatus, including switchgear, transformers, and capacitors. The Apparatus Bushing are molded using high quality Epoxy Rubber, meet the requirement of standard EN50180/EN50181 DIN47636/HN52-S-61. Kit contents: ● Apparatus bushi...
  • 25 kV 250A Apparatus Bushing

    25 kV 250A Apparatus Bushing

    Standard: ● DIN 47636-7-1990 Power cable with extension cones, separable, with Um below 35kV Sub-connector device size· ● Exposed Semiconductor Sheaths for High – Voltage Cable Fittings and Detachable Insulated Connectors; IEEE. ● IEC60502 Extruded insulated power cables with rated voltages from 1 kV (Um= 1.2 kV) to 30 kV (Um= 35 kV) and annex; ● IEC61442 Test methods for accessories for power cables with rated voltages from 6kV (Um= 7.2kV) to 30kV (Um= 35kV); ● GB 12706-2002 Extruded i...