We help the world growing since 2004

Featured

  • Manufacturer for European Arrester - polymer lightning arrester 12-15kV – Anhuang

    Manufacturer for European Arrester - polymer lightning arrester 12-15kV – Anhuang

    Zinc-Oxide Surge Arrester General The Zinc Oxide Type Surge Arrester is the latest advanced over-voltage protector for distribution line and power station device. Incorporated with zinc oxide and other metal oxide as the core resistor disc, the volt-ampere characteristics and the through-current capability of the resistor disc are improved drastically compared with the conventional SiC type surge arrester. Under nominal operating voltage, the current through the surge arrester is only a...
  • Super Purchasing for 15/24kv 600a Insulated Protective Cap - 600A 15kV Integral Deadbreak Bushing – Anhuang

    Super Purchasing for 15/24kv 600a Insulated Protective Cap - 600A 15kV Integral Deadbreak Bushing – Anhuang

    Anhuang specialized in Integral Deadbreak Bushing, we supply high quality Integral Deadbreak Bushing. General: 600A Integral Dead break or Vacuum Switch Bushing are designed for Cable Branch Cabinet with Sf6 Loadbreak switch. Separable connectors, such as 600A T and T-11 dead break connectors can be used with these bushing. These bushings are made by Epoxy Resin. With the skirt make the Dead break Rotatable Feed-thru Bushing can be used better. Kit Contents: ● lntegral Deadbreak Bushing ● I...
  • One of Hottest for Surge Protection Counter - XRNT backup fuse – Anhuang

    One of Hottest for Surge Protection Counter - XRNT backup fuse – Anhuang

    The magne X interrupter is used in series with low current primary protection devices such as a Bay-o-net Fuse or Magne X The magne X interrupter . The magne X interrupter highly efficient current-limiting section minimizes the effects of high fault current stresses on equipment and the distribution system.Its minimum interrupting rating is coordinated with that of a low current interrupter to avoid undesirable low current operation ; yet its maximum interrupting rating will clear the highest...
  • Renewable Design for European Deadbreak T Connector - 600A Loadbreak Reducing Tap Plug – Anhuang

    Renewable Design for European Deadbreak T Connector - 600A Loadbreak Reducing Tap Plug – Anhuang

    Anhuang specialized in Loadbreak Reducing Tap Plug, we supply high quality Loadbreak Reducing Tap Plug. General: 600A/200A Integral Dead break Bushing is used to convert a standard 600A dead break interface to a standard 200A load break interface. Used with a 200A insulated protective cap, M.O.V Elbow Arrester, Grounding Elbow or Load break Elbow Connector, An integral dead break bushing provides a fully shielded. It will be T-Ⅱconnector if connect with T connector. Kit Contents: Loadbreak Re...
  • Lowest Price for 12/24kv 630a Separable Elbow Connector - Deadbreak Type Junction – Anhuang

    Lowest Price for 12/24kv 630a Separable Elbow Connector - Deadbreak Type Junction – Anhuang

    Anhuang specialised in Deadbreak Type Junction,we supply high quality Deadbreak Type Junction. Our products accord with TEEE386, and IEC standards. General: 35kV 630A Two-Side Bushing are used to connect two or more 630A dead break terminators. Two-Side Bushing are typically used in a separable splice, or with a bushing extender. to increase the distance from the apparatus front plate to the 600A terminator. easing cable training. The Two-Side Bushing maintaining full interchangeability with...
  • China wholesale 34/78 24kv Elbow Surge Arrester T Type - monitor for lightning arrester – Anhuang

    China wholesale 34/78 24kv Elbow Surge Arrester T Type - monitor for lightning arrester – Anhuang

    arrester monitor is used to record arrester action number and leakage current. 
  • Factory wholesale Drop-Out Fuse Cutout - Oil-immersed four-position loadbreak switch – Anhuang

    Factory wholesale Drop-Out Fuse Cutout - Oil-immersed four-position loadbreak switch – Anhuang

    12kV 630A Oil-filled four-position load switch is designed for ring-type US-box ring change cabinet designed to meet the IEEE, IEC and GB standards of all requirements. Can be used in grounded or underground systems.  Oil-immersed four-position load switch in the installation, close to the transformer core can minimize the internal connection Cable capacitance, and thus significantly reduce the loop in the ferromagnetic resonance. Both side mounting and top mounting are available For general ...
  • High definition Arrester Lightning - polymer lightning arrester 12-15kV – Anhuang

    High definition Arrester Lightning - polymer lightning arrester 12-15kV – Anhuang

    Zinc-Oxide Surge Arrester General The Zinc Oxide Type Surge Arrester is the latest advanced over-voltage protector for distribution line and power station device. Incorporated with zinc oxide and other metal oxide as the core resistor disc, the volt-ampere characteristics and the through-current capability of the resistor disc are improved drastically compared with the conventional SiC type surge arrester. Under nominal operating voltage, the current through the surge arrester is only a...
  • Fast delivery 12/24kv 630a Bushing Insert - 15kV 200A Load Break Elbow Connector – Anhuang

    Fast delivery 12/24kv 630a Bushing Insert - 15kV 200A Load Break Elbow Connector – Anhuang

    Anhuang specialized in Load break Elbow Connector, we supply high quality Loadbreak Elbow Connector. Our products accord with TEEE386, and IEC standards. Introduction: 25kV 200A Load break Elbow Connector is a fully-shielded and insulated plug­in termination for connecting underground cable to distribution power system of pad-mound transformer, surrounding power supply branch box, cable branch box equipped with load break bushings. The elbow connector and bushing insert comprise the essentia...
  • Good Wholesale Vendors 12/24kv 630a Separable T Connector - 15kV 200A Insulated Protective Cap – Anhuang

    Good Wholesale Vendors 12/24kv 630a Separable T Connector - 15kV 200A Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 15/25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated...
  • Super Purchasing for Ring Main Unit Rmu - Oil-immersed four-position loadbreak switch – Anhuang

    Super Purchasing for Ring Main Unit Rmu - Oil-immersed four-position loadbreak switch – Anhuang

    12kV 630A Oil-filled four-position load switch is designed for ring-type US-box ring change cabinet designed to meet the IEEE, IEC and GB standards of all requirements. Can be used in grounded or underground systems.  Oil-immersed four-position load switch in the installation, close to the transformer core can minimize the internal connection Cable capacitance, and thus significantly reduce the loop in the ferromagnetic resonance. Both side mounting and top mounting are available For general ...
  • Personlized Products protective Insulation Caps - A DJT 5630A T  joint – Anhuang

    Personlized Products protective Insulation Caps - A DJT 5630A T joint – Anhuang

    Anhuang specialized in T-joint, we supply high quality T-joint. Application: l Connection with the switch gear casing can be achieved between multiple switch gear connection. l System voltage: 8. 7 / 15kV 12 / 20kV. l Continuous rated current: 630A 1250A. Characteristics: l When combined with Type C bushings, a fully insulated and fully hermetically separable connection is provided. Unipolar, plug-in design. l Busbar from the round copper rod(tube) composition, surface composite silicone ...