We help the world growing since 2004

Power Cable Accessories

  • 15kV Loadbreak Elbow Surge Arrester

    15kV Loadbreak Elbow Surge Arrester

    Anhuang specialized in Elbow Surge Arrester, we supply high quality Elbow Surge Arrester. Our products accord with IEEE386, and IEC standards. Introduction: 17/50kV loadbreak Elbow Surge Arrester with silicone rubber connector housing and installed on the 200A Load break bushing extender. It protects medium voltage network, for example: transformers switch gears and cable. Incoming over voltage waves and voltage increase by reflection are limited. Description Reference No. Continuous oper...
  • 24kV Loadbreak Elbow Surge Arrester

    24kV Loadbreak Elbow Surge Arrester

    Anhuang specialized in Elbow Surge Arrester, we supply high quality Elbow Surge Arrester. Our products accord with IEEE386, and IEC standards. 34kV Surge Arrester Insert is widely used on medium voltage network, such as transformers switch gears and cable and other equipments. Product Structure 1.EPDM INSULATION: High quality sulfur cured EPDM insulation is mixed and formulated in-house for complete control of insulation rubber characteristics. 2.SEMI-CONDUCTIVE SHIELD: Molded semi-conducti...
  • Surge Arrester Insert

    Surge Arrester Insert

    Anhuang specialized in Elbow Surge Arrester Insert, we supply high quality Elbow Surge Arrester Insert. Our products accord with IEEE386, and IEC standards. 17/50kV Surge Arrester Insert is widely used on medium voltage network, such as transformers switch gears and cable and others, used together with load break cable accessories such as bushing elbow connector and insulated protective cap. Product Structure 1.EPDM INSULATION: High quality sulfur cured EPDM insulation is mixed and formulate...
  • 15Kv630ADeadbreak T Fore Connector

    15Kv630ADeadbreak T Fore Connector

    Anhuang specialized in Deadbreak T Fore Connector, we supply high quality Dead break T Fore Connector. Application: ●For connection of polymeric cable to transformers, switch gear, motors and other equipment with a pre-molded separable connector. ●For indoor and outdoor installations. ●System voltage up to 24 kV. ●Continuous current 630 A (900 A overload for 8 hours). ●Cable particulars: – Polymeric cable (XLPE, EPR, etc.) – Copper or aluminum conductors – Semiconduc...
  • 12-24kV 630A Two Side Bushing

    12-24kV 630A Two Side Bushing

    Anhuang specialized in Deadbreak T Rear Connector, we supply high quality Deadbreak T Rear Connector. General: 630A Dead break Type Junction is designed for outdoor Power Cable Sector and Underground Power Cable Sector. It is suitable for branch box, surround power supply branch cabinet of European style, and can connect with 630A Shield Fore Connector. Kit Contents: ●Deadbreak Type Junction ● Installation Instruction Sheet ●Quality Certificate Application Example: Description Reference ...
  • Apparatus Bushings Insert

    Apparatus Bushings Insert

    Anhuang specialized in Apparatus Bushing Insert, we supply high quality Apparatus Bushing Insert. General: 630A Apparatus Bushing Insert are designed for European type Cable Branch Cabinet, Power Surrounding Supply Cabinet, Used in European type Cable Branch Cabinet connecting with high voltage. These bushings can connect with the dead break cable connector. These bushing are molded using high quality sulfur-cured insulating of Epoxy Resin Rubber. Kit Contents: l Apparatus Bushings Insert l...
  • A TGZ-1225kV 630A Air Bushing

    A TGZ-1225kV 630A Air Bushing

    Anhuang specialized in Air Bushing, we supply high quality Air Bushing. General: 630A Air Bushing are designed for European type Cable Branch Cabinet, Power Surrounding Supply Cabinet, Used in European type Cable Branch Cabinet connecting with high voltage. Installed in inflatable lockers to connect Type 630A connector for 630A. These bushings can connect with the dead break cable connector. These bushing a『e made by Epoxy Resin and copper bar with good mechanical and electrical properties....
  • Integral Deadbreak Bushing

    Integral Deadbreak Bushing

    Anhuang specialized in Integral Dead break Bushing, we supply high quality  Integral Deadbreak Bushing. 12kV 630A Insulated Dead break Bushing are designed for Cable Branch Cabinet with Sf6 Switch. Separable connectors, such as 630A T and T-11 dead break connectors can be used with these bushing. These bushing are made by Epoxy Resin. With the skirt make the Dead break Rotatable Feed-thru Bushing can be used better. Kit Contents: ● Integral Deadbreak Bushing ● Covering cap ●  Installation Ins...
  • A SJT 15630A Cross connector

    A SJT 15630A Cross connector

    Anhuang specialized in Cross connector, we supply high quality Cross connector. Application: l Connection with the switchgear casing can be achieved between multiple switchgear connection. l System voltage: 8. 7 / 15kV \ 12 / 20kV. l Continuous rated current: 630A \ 1250A. Characteristics: l When combined with Type C bushings, a fully insulated and fully hermetically separable connection is provided. Unipolar, plug-in design. l Busbar from the round copper rod(tube) composition, surface comp...
  • A DJT 5630A T  joint

    A DJT 5630A T joint

    Anhuang specialized in T-joint, we supply high quality T-joint. Application: l Connection with the switch gear casing can be achieved between multiple switch gear connection. l System voltage: 8. 7 / 15kV \ 12 / 20kV. l Continuous rated current: 630A \ 1250A. Characteristics: l When combined with Type C bushings, a fully insulated and fully hermetically separable connection is provided. Unipolar, plug-in design. l Busbar from the round copper rod(tube) composition, surface composite silicon...
  • Apparatus Bushing

    Apparatus Bushing

    Anhuang specialized in Apparatus Bushing, we supply high quality Apparatus Bushing. General: 35kV 630A Apparatus Bushing are designed for European type Cable Branch Cabinet, Power Surrounding Supply Cabinet, Used in European type cable branch cabinet connecting with high voltage and wind power substation. These bushings can connect with the dead break cable connector. These bushing are made by Epoxy Resin with good mechanical and electrical properties. Voltage Rating: Description Paramete...
  • 630A / 1250A Busbar

    630A / 1250A Busbar

    Anhuang specialized in 630A / 1250A Busbar, we supply high quality Busbar. General: Bus length L to two switch gear equipment casing center distance as the basis, when ordering to provide parameters; if the bus Length as the basis, please specify. Ordering Information: Description Reference No. 12kv 630A/1250A Bus Bar AH MX-12/630/1250 24kv 630A/1250A Bus Bar AH MX-24/630/1250
12345 Next > >> Page 1 / 5