We help the world growing since 2004

Featured

  • Good quality Indoor Load Break Switch - Oil-immersed four-position loadbreak switch – Anhuang

    Good quality Indoor Load Break Switch - Oil-immersed four-position loadbreak switch – Anhuang

    12kV 630A Oil-filled four-position load switch is designed for ring-type US-box ring change cabinet designed to meet the IEEE, IEC and GB standards of all requirements. Can be used in grounded or underground systems.  Oil-immersed four-position load switch in the installation, close to the transformer core can minimize the internal connection Cable capacitance, and thus significantly reduce the loop in the ferromagnetic resonance. Both side mounting and top mounting are available For general ...
  • High Quality for Porcelain Fuse Cutout - bay o net fuse holder – Anhuang

    High Quality for Porcelain Fuse Cutout - bay o net fuse holder – Anhuang

    Bay-o-net Assembly is the brief element of oil-transformer, to protect the equipment when over-current. When install the fuse wire in it, the Bay-o-net will provide the safe, highly efficient protection, according to the current, oil temperature. The Bay-o-net Assembly is suitable for current sensing fuse wire, dual sensing fuse wire, dual element fuse wire, and ELSP current-limiting backup fuse,etc. It is suitable for high-voltage power system with alternating current of 50HZ, standard volta...
  • Rapid Delivery for 12/24kv 630a Insulated Protective Cap - Insulated Protective Cap – Anhuang

    Rapid Delivery for 12/24kv 630a Insulated Protective Cap - Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. General: 15kV/24kV 630A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanen...
  • 2020 wholesale price Isolating Switch - XRNT backup fuse – Anhuang

    2020 wholesale price Isolating Switch - XRNT backup fuse – Anhuang

    The magne X interrupter is used in series with low current primary protection devices such as a Bay-o-net Fuse or Magne X The magne X interrupter . The magne X interrupter highly efficient current-limiting section minimizes the effects of high fault current stresses on equipment and the distribution system.Its minimum interrupting rating is coordinated with that of a low current interrupter to avoid undesirable low current operation ; yet its maximum interrupting rating will clear the highest...
  • Factory wholesale Vacuum circuit breaker - Oil-immersed four-position loadbreak switch – Anhuang

    Factory wholesale Vacuum circuit breaker - Oil-immersed four-position loadbreak switch – Anhuang

    12kV 630A Oil-filled four-position load switch is designed for ring-type US-box ring change cabinet designed to meet the IEEE, IEC and GB standards of all requirements. Can be used in grounded or underground systems.  Oil-immersed four-position load switch in the installation, close to the transformer core can minimize the internal connection Cable capacitance, and thus significantly reduce the loop in the ferromagnetic resonance. Both side mounting and top mounting are available For general ...
  • China wholesale High Voltage Switchgear - SF6 Insulated Load Break Switch – Anhuang

    China wholesale High Voltage Switchgear - SF6 Insulated Load Break Switch – Anhuang

    Overview The load switch is a kind of switchgear with a simple arc extinguishing device. It uses SF6 gas as the insulation and arc extinguishing medium. It can be used as the closing and breaking load current and overload current. It can also be used as the closing and breaking no-load. Lines, no-load transformers and capacitor banks, etc., all three-position load switches with on, off and grounding functions are simple in structure and affordable. In addition to long life, strong breaking fo...
  • High definition Cold Shrink Sleeving - Heat shrinkable power cable middle connector – Anhuang

    High definition Cold Shrink Sleeving - Heat shrinkable power cable middle connector – Anhuang

    Summary: A wide range of glass fiber reinforced plastic shell products. mainly 10kV single core 10kV three core, 35kV single core 35kV three core,110kV, 220kV, 500kV single core intermediate joint glass steel shell a few categories. The main function of the glass fiber reinforced plastic shell is to withstand the impact of a certain external force and damage to the middle joint. Installation method: 1 preparations 1.1 Check the glass fiber reinforced plastic shell for the specifications and ...
  • Newly Arrival Outdoor Circuit Breaker - Oil-immersed four-position loadbreak switch – Anhuang

    Newly Arrival Outdoor Circuit Breaker - Oil-immersed four-position loadbreak switch – Anhuang

    12kV 630A Oil-filled four-position load switch is designed for ring-type US-box ring change cabinet designed to meet the IEEE, IEC and GB standards of all requirements. Can be used in grounded or underground systems.  Oil-immersed four-position load switch in the installation, close to the transformer core can minimize the internal connection Cable capacitance, and thus significantly reduce the loop in the ferromagnetic resonance. Both side mounting and top mounting are available For general ...
  • Factory Outlets 630a 24kv Screened Separable Connector - 12kV24kV 630A Dead break Type H Junction – Anhuang

    Factory Outlets 630a 24kv Screened Separable Connector - 12kV24kV 630A Dead break Type H Junction – Anhuang

    Anhuang specialized in Integral Deadbreak Bushing, we supply high quality Integral Deadbreak Bushing. General: 12kV/24kV 630A Dead break Type H Junction is designed for outdoor Power Cable Sector and Underground Power Cable Sector. It is suitable for branch box surround power supply branch cabinet of European style, and can connect with 630A Shield Fore-Connector. Be molded using high quality sulfur-cured insulating and semi-conducting EPDM rubber. Order Information: Description Referenc...
  • Best quality Silicone Tube - lkV Silicon rubber cold shrink cable accessories – Anhuang

    Best quality Silicone Tube - lkV Silicon rubber cold shrink cable accessories – Anhuang

    Summary: Terminal insulation material is made with high quality silicon rubber material and, it has good hydrophobic performance, when the droplets after the above, ready to roll down, do not form a conductive film of water and has a hydrophobic self-healing properties. In addition, it has a strong insulation, resistance, corrosion resistance and UV resistance, the biggest advantage is to ensure long-term use of stable performance. Long life, the same life with the cable body. Accessory cabl...
  • China wholesale High Voltage Switchgear - Incoming operating mechanism for gas insulated switchgear – Anhuang

    China wholesale High Voltage Switchgear - Incoming operating mechanism for gas insulated switchgear – Anhuang

    SF6 Insulated Switchgear Accessories: Manual/Motor: A, hard interlock / B, soft interlock Technical Parameters: Content Unit Parameter Switch Contact pressure standard N 190-210 Open tri-phase dissimilar ms ≤2 Close tri-phase dissimilar ms ≤2 Opening average speed m/s 3-6 Closing average speed m/s 4-6 Tri-phase bounce standard m/s ≤2 Three-phase output angle ° 88° Mechanical life Times 10000 Operation strength N ≤110 Drawing:
  • High Quality 33kv Rmu Switchgear - Indoor SF6 for switchgear 10KV 630A Gas Insulated Load Break Switch LBS Indoor Isolating switch – Anhuang

    High Quality 33kv Rmu Switchgear - Indoor SF6 for switchgear 10KV 630A Gas Insulated Load Break Switch LBS Indoor Isolating switch – Anhuang

    The use of environmental conditions: 1. Altitude: ≤2000m; Earthquake intensity: not more than eight 2. Air temperature: not higher than +40℃, not less than -30℃. The daily average of relative humidity not more than 90%, monthly average not more than 90%. 3. The installation site with frequent and violent vibration is not suitable for the installation site with water vapor, gas, chemical corrosive deposition, salt spray, dust and dirt, fire and explosion hazards that obviously affect the perfo...