We help the world growing since 2004

Cable Clamp

Our growth depends around the superior machines, exceptional talents and consistently strengthened technology forces for Cable Clamp, Cable Clamp, 24kv 200a Insulated Protective Cap, American Box Substation, We cordially welcome customers from at home and abroad to join us and cooperate with us to enjoy a better future. Our products are broadly identified and trustworthy by people and may meet continually modifying financial and social requires of Cable Clamp, For many years, we have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.


  • Wholesale Price Power Cable Termination Kits - Deadbreak Type Junction – Anhuang

    Wholesale Price Power Cable Termination Kits - Deadbreak Type Junction – Anhuang

    Anhuang specialised in Deadbreak Type Junction,we supply high quality Deadbreak Type Junction. Our products accord with TEEE386, and IEC standards. General: 35kV 630A Two-Side Bushing are used to connect two or more 630A dead break terminators. Two-Side Bushing are typically used in a separable splice, or with a bushing extender. to increase the distance from the apparatus front plate to the 600A terminator. easing cable training. The Two-Side Bushing maintaining full interchangeability with...
  • OEM Supply 15kv 600a Integral Deadbreak Bushing - 15Kv630ADeadbreak T Fore Connector – Anhuang

    OEM Supply 15kv 600a Integral Deadbreak Bushing - 15Kv630ADeadbreak T Fore Connector – Anhuang

    Anhuang specialized in Deadbreak T Fore Connector, we supply high quality Dead break T Fore Connector. Application: ●For connection of polymeric cable to transformers, switch gear, motors and other equipment with a pre-molded separable connector. ●For indoor and outdoor installations. ●System voltage up to 24 kV. ●Continuous current 630 A (900 A overload for 8 hours). ●Cable particulars: – Polymeric cable (XLPE, EPR, etc.) – Copper or aluminum conductors – Semiconduc...
  • Low MOQ for 24kv 250a Insulated Protective Cap - 15kV 200A Insulated Protective Cap – Anhuang

    Low MOQ for 24kv 250a Insulated Protective Cap - 15kV 200A Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 15/25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated...
  • OEM China 12/24kv 630a Specific Deadbreak Rotatable Feedthru Bushing - Insulated Stand Off Bushing – Anhuang

    OEM China 12/24kv 630a Specific Deadbreak Rotatable Feedthru Bushing - Insulated Stand Off Bushing – Anhuang

    Anhuang specialized in Parking Bushing, we supply high quality Parking Bushing. Our products accord with IEEE386, and IEC standards. The insulated stand off bushing is designed to be installed in the parking stand mounted on a transformer or other apparatus. It is used together with the cable accessories such as: elbow connector elbow surge arrester and the other 200A Load break accessories. A grounding lug is provided on the standoff bushing bracket for attachment of a drain wire to ensure d...
  • OEM Manufacturer 12/24kv 630a Air Bushing Well - 15kV 630A Specific Junction – Anhuang

    OEM Manufacturer 12/24kv 630a Air Bushing Well - 15kV 630A Specific Junction – Anhuang

    Anhuang specialized in Shaped busbar, we supply high quality Shaped busbar. Our products accord with TEEE386, and IEC standards. Our products export widely all over the word. General: 630A Specific Junction provide two, three or four 630A deadbreak 15kV mixed interfaces on one side that are internally bused together and meet all requirements of ANSI/IEEE 386-Separable Insulated Connector Systems. When mated with a comparably rated product, the junction provides a fully shielded, fully insula...
  • Manufactur standard 25kv 200a Loadbreak Elbow Connector - Insulated Protective Cap – Anhuang

    Manufactur standard 25kv 200a Loadbreak Elbow Connector - Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. General: 15kV/24kV 630A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanen...
  • Newly Arrival Disconnector Switch - 24kV 200A Rotatable Feedthru Insert – Anhuang

    Newly Arrival Disconnector Switch - 24kV 200A Rotatable Feedthru Insert – Anhuang

    Anhuang specialized in Rotatable Feedthru Insert,we supply high quality Rotatable Feedthru Insert. Our products accord with IEEE386, and IEC standards. Introduction: 24kV 200A Rotatable feedthrough insert is used to provide dual bushings from a single apparatus bushing well。 It makes converting radial-feed transformers to feed thru transformers and adding in-line arrester protection both easy and practical. Its patented, built-in torque limiting ratchet prevents operators from accidentally b...
  • Manufacturing Companies for 24kv 250a Deadbreak Straight Connector - 15kV 200A Insulated Protective Cap – Anhuang

    Manufacturing Companies for 24kv 250a Deadbreak Straight Connector - 15kV 200A Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 15/25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated...
  • Best-Selling 15kv 200a Insulated Protective Cap - 15kV24kV 600A Deadbreak Busbar junctions – Anhuang

    Best-Selling 15kv 200a Insulated Protective Cap - 15kV24kV 600A Deadbreak Busbar junctions – Anhuang

    Anhuang specialized in Dead break junctions, we supply high quality Dead break junctions. General: 600A Dead break busbar junctions in the cable branch line play the role of bus. Its characteristics are fully insulated, fully sealed. 600A busbar can T-type cable connector, T-II cable connector, 600A extension tube and 600A insulated cap with the composition of cable multi-branch line. 600A Deadbreak busbar junctions made of high-quality insulating material. Kit Contents: ●Busbar body ●Insta...
  • Hot sale 10kv Cold Shrinkable Power Cable Terminal - 600A Specific deadbreak Junction – Anhuang

    Hot sale 10kv Cold Shrinkable Power Cable Terminal - 600A Specific deadbreak Junction – Anhuang

    Anhuang specialized in Shaped busbar, we supply high quality Specific deadbreak Junction. General: 200A/600A Specific deadbreak Junction provide two, three or four 200A load break and 600A dead break, 15kV mixed interfaces on one side that are internally bused together and meet all requirements of ANSI/IEEE 386-Separable Insulated Connector Systems. When mated with a comparably rated product, the junction provides a fully shielded, fully insulated, separable connection for load break or dead...
  • Wholesale Price Power Cable Termination Kits - 15kV 200A Load Break Elbow Connector – Anhuang

    Wholesale Price Power Cable Termination Kits - 15kV 200A Load Break Elbow Connector – Anhuang

    Anhuang specialized in Load break Elbow Connector, we supply high quality Loadbreak Elbow Connector. Our products accord with TEEE386, and IEC standards. Introduction: 25kV 200A Load break Elbow Connector is a fully-shielded and insulated plug­in termination for connecting underground cable to distribution power system of pad-mound transformer, surrounding power supply branch box, cable branch box equipped with load break bushings. The elbow connector and bushing insert comprise the essentia...
  • Good quality 35kv Cold Shrinkable Power Cable Terminal - Dead Break T Rear Arrester – Anhuang

    Good quality 35kv Cold Shrinkable Power Cable Terminal - Dead Break T Rear Arrester – Anhuang

    Anhuang specialized in Deadbreak T Rear arrester, we supply high quality Deadbreak T Rear arrester. General: 17 /50kV European-style followed by arrester provide a reliable protective medium voltage net work. using the semi-conductive shield to make sure the person is safe and the equipment can work well, also they have the high quantity to make sure they can work in the circumstances. The 17/50kV European-style Elbow arrester can be use together with the European front connector. Kit Conten...