We help the world growing since 2004

Silicone Rubber Connector

Gaining purchaser gratification is our firm's intention eternally. We will make wonderful endeavours to build new and top-quality merchandise, satisfy your exclusive needs and provide you with pre-sale, on-sale and after-sale products and services for Silicone Rubber Connector, Separable Cable Connector, Arrester Lightning, 15kv 600a Integral Deadbreak Bushing, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits. Our business puts emphasis on the administration, the introduction of talented personnel, as well as the construction of team building, trying hard to further improve the standard and liability consciousness of staff members customers. Our enterprise successfully attained IS9001 Certification and European CE Certification of Silicone Rubber Connector, Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers' satisfaction and achieve win-win situation .


  • Cheap PriceList for 15kv 200a Extended Insulated Bushing - 630A / 1250A Busbar – Anhuang

    Cheap PriceList for 15kv 200a Extended Insulated Bushing - 630A / 1250A Busbar – Anhuang

    Anhuang specialized in 630A / 1250A Busbar, we supply high quality Busbar. General: Bus length L to two switch gear equipment casing center distance as the basis, when ordering to provide parameters; if the bus Length as the basis, please specify. Ordering Information: Description Reference No. 12kv 630A/1250A Bus Bar AH MX-12/630/1250 24kv 630A/1250A Bus Bar AH MX-24/630/1250
  • Short Lead Time for Deadbreak Rear Connector - A SJT 15630A Cross connector – Anhuang

    Short Lead Time for Deadbreak Rear Connector - A SJT 15630A Cross connector – Anhuang

    Anhuang specialized in Cross connector, we supply high quality Cross connector. Application: l Connection with the switchgear casing can be achieved between multiple switchgear connection. l System voltage: 8. 7 / 15kV 12 / 20kV. l Continuous rated current: 630A 1250A. Characteristics: l When combined with Type C bushings, a fully insulated and fully hermetically separable connection is provided. Unipolar, plug-in design. l Busbar from the round copper rod(tube) composition, surface compos...
  • OEM/ODM Supplier 24kv 250a Extended Apparatus Bushing With Skirt - Deadbreak T Rear Connector – Anhuang

    OEM/ODM Supplier 24kv 250a Extended Apparatus Bushing With Skirt - Deadbreak T Rear Connector – Anhuang

    Anhuang specialized in Deadbreak T Rear Connector, we supply high quality Dead break T Rear Connector. General: 630A Deadbreak T rear connector can be use together with the T Fore connector and some other back connector, it can be provide more branches, and they can not together with the bushing directly, cover the back protection cap on the end of the blanking cover. Features: ●Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug. ● ...
  • Factory Price Separable Connector 24kV - Deadbreak Type Junction – Anhuang

    Factory Price Separable Connector 24kV - Deadbreak Type Junction – Anhuang

    Anhuang specialised in Deadbreak Type Junction,we supply high quality Deadbreak Type Junction. Our products accord with TEEE386, and IEC standards. General: 35kV 630A Two-Side Bushing are used to connect two or more 630A dead break terminators. Two-Side Bushing are typically used in a separable splice, or with a bushing extender. to increase the distance from the apparatus front plate to the 600A terminator. easing cable training. The Two-Side Bushing maintaining full interchangeability with...
  • OEM Customized 35kv 630a Bushing Well - 15kV 200A Bushing Insert – Anhuang

    OEM Customized 35kv 630a Bushing Well - 15kV 200A Bushing Insert – Anhuang

    Anhuang specialized in Bushing insert, we supply high quality Bushing insert. Our products accord with IEEE386, and IEC standards. Introduction: 15kV 200A Bushing insert threads into a universal bushing well to provide the same function as an integral load break bushing. Using bushing inserts makes field installation and replacement possible and efficient. Bushing inserts and elbow connectors comp rise the essential components of all load break connections. The bushing Insert uses a patented ...
  • New Fashion Design for 35kv 630a Separable T Connector - Deadbreak T Rear Connector – Anhuang

    New Fashion Design for 35kv 630a Separable T Connector - Deadbreak T Rear Connector – Anhuang

    Anhuang specialized in Deadbreak T Rear Connector, we supply high quality Dead break T Rear Connector. General: 630A Deadbreak T rear connector can be use together with the T Fore connector and some other back connector, it can be provide more branches, and they can not together with the bushing directly, cover the back protection cap on the end of the blanking cover. Features: ●Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug. ● ...
  • Factory Outlets 630a 24kv Screened Separable Connector - 25kV 250A Load break Elbow Connector – Anhuang

    Factory Outlets 630a 24kv Screened Separable Connector - 25kV 250A Load break Elbow Connector – Anhuang

    Anhuang specialized in Loadbreak Elbow Connector, we supply high quality Loadbreak Elbow Connector. Features: l Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug. l Built-in capacitive test point to determine the circuit status or install a fault indicator. l No minimum phase clearance requirements. l Mounting can be vertical, horizontal, or any angle in between. Application: l For connection of polymeric cable to transformers, swi...
  • Top Suppliers 15kv 200a Loadbreak Elbow Connector - 15Kv25Kv Bushing Extender – Anhuang

    Top Suppliers 15kv 200a Loadbreak Elbow Connector - 15Kv25Kv Bushing Extender – Anhuang

    Anhuang specialized in Class Bushing Extender, we supply high quality Class Bushing Extender. General: 600A class bushing extender allow installation on standard de-energized 600A dead break interfaces for coupling reducing tap plugs, connecting plugs and apparatus bushings. 200A Load break interfaces for Elbow surge arrester and elbow connector. When assembled to mating apparatus, it provides a completely submersible, fully shielded unit. Kit Contents: EPDM bushing extender Clearing Paper ...
  • Hot Selling for Elbow Connector - Fused PT Elbow Connector – Anhuang

    Hot Selling for Elbow Connector - Fused PT Elbow Connector – Anhuang

    Anhuang specialized in Loadbreak Elbow Connector, we supply high quality Loadbreak Elbow Connector. Our products accord with IEEE386, and IEC standards. Introduction: Elbow Connector is a fully-shielded and insulted plug-in termination for connection underground cable to distribution power system of pad-mound tra­nsformer, surrounding power supply branch box, cable branch box equipped with load break bushings. The elbow connector and bushing insert comprise the essential components of all loa...
  • Excellent quality Cable Clamp - 600A T  Deadbreak Connector – Anhuang

    Excellent quality Cable Clamp - 600A T Deadbreak Connector – Anhuang

    Anhuang specialized in Deadbreak Connector ,we supply high quality Dead break Connector. Implementation of standards: ● Separable insulated connector system for distribution systems above; ANSI / IEEE Std386-2006600V ● Exposed semiconductor jackets for high – voltage cable splices and separable insulated connectors; ● Extruded insulated power cables and their accessories with rated voltages above 1 kV (Um = 1.2 kV) to 30 kV (Um – 35 kV); ● Test methods for accessories for power ca...
  • Best-Selling 15kv 200a Insulated Protective Cap - 15kV24kV 600A Deadbreak Busbar junctions – Anhuang

    Best-Selling 15kv 200a Insulated Protective Cap - 15kV24kV 600A Deadbreak Busbar junctions – Anhuang

    Anhuang specialized in Dead break junctions, we supply high quality Dead break junctions. General: 600A Dead break busbar junctions in the cable branch line play the role of bus. Its characteristics are fully insulated, fully sealed. 600A busbar can T-type cable connector, T-II cable connector, 600A extension tube and 600A insulated cap with the composition of cable multi-branch line. 600A Deadbreak busbar junctions made of high-quality insulating material. Kit Contents: ●Busbar body ●Insta...
  • Factory Price Separable Connector 24kV - Integral Deadbreak Bushing – Anhuang

    Factory Price Separable Connector 24kV - Integral Deadbreak Bushing – Anhuang

    Anhuang specialized in Integral Dead break Bushing, we supply high quality  Integral Deadbreak Bushing. 12kV 630A Insulated Dead break Bushing are designed for Cable Branch Cabinet with Sf6 Switch. Separable connectors, such as 630A T and T-11 dead break connectors can be used with these bushing. These bushing are made by Epoxy Resin. With the skirt make the Dead break Rotatable Feed-thru Bushing can be used better. Kit Contents: ● Integral Deadbreak Bushing ● Covering cap ●  Installation Ins...