Hot Selling for Elbow Connector - Fused PT Elbow Connector – Anhuang

Anhuang specialized in Loadbreak Elbow Connector, we supply high quality Loadbreak Elbow Connector. Our products accord with IEEE386, and IEC standards.

Introduction:

Elbow Connector is a fully-shielded and insulted plug-in termination for connection underground cable to distribution power system of pad-mound tra­nsformer, surrounding power supply branch box, cable branch box equipped with load break bushings. The elbow connector and bushing insert comprise the essential components of all load break connections. It can mate with 200A Bu­shing insert and 200A jack of T-11 Connector, 200A Junction, load break bushin­g insert (load break rotatable feed-thru insert), apparatus bushing and 600A/ 200A bushing extender. It can operating switch of 200A loading current. The test point is used to connect Hot Voltage Indicator. The Load break Elbows are mo­lded using high quality sulfur-cured insulating and semi-conduction EPDM rubber.

The available conductor cross section is 35-50mm2for 15kv cable. The conductive pole W/ARC extinguishes function.

1、PULLINGEYE: Stainless steel reinforced for positive shotgun stick switching operations.
2、INSULATION: High-quality EPDM rubber formulated, mixed, and milled in-house for consistent and reliable field performance.
3、SEMI-CONDUCTIVE INSERT: High-quality EPDM rubber creates a smooth surface around the “current interchange” to evenly distribute electrical stress within the insulation.
4、TEST POINT(OPTIONAL): Corrosion-resistance, conductive electrode provides consistent capacitive voltage for application of fault indicators and determining a circuit’s state (cap not shown)
5、SEMI-CONDUCTIVE SHIELD: High-quality EPDM rubber provides protective dead front shield that meets requirements of IEEE Standard 592.
6、LOADBREAK PROBE: Tin-plated copper probe with arc-ablative tip (arc follower)
Description Reference No. operating voltage operating nominal current
200A 24kV feed-thru Bushing Insert AH STT-24/200 24kV 200A
7、CONDUCTOR CABLE LUG: Inertia-welded aluminum barrel and threaded copper lug makes crimping easy and ensures a tight, reliable electrical connection with load break probe. Standard IEEE and CSA types available.