We help the world growing since 2004

protective Insulation Caps

We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for protective Insulation Caps, Heat Shrinkable Sleeves, Loadbreak Switch, Power Surge Protective, We can easily offer you by far the most aggressive prices and good quality, because we've been much additional Specialist! So please will not hesitate to call us. It adheres on the tenet "Honest, industrious, enterprising, innovative" to acquire new solutions continuously. It regards prospects, success as its personal success. Let us build prosperous future hand in hand for protective Insulation Caps, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We will not live up to the historic opportunity of the times.


  • Insulated Protective Cap

    Insulated Protective Cap

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. General: 15kV/24kV 630A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanen...
  • 15kV 600A Insulated Protective Cap

    15kV 600A Insulated Protective Cap

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. General introduction: 15kV/24kV 600A Insulated Protective Cap is an accessory device designed to electric ally insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be use...
  • 25kV 250A insulated protective cap

    25kV 250A insulated protective cap

    Anhuang specialized in Insulated Protective Cap ,we supply high quality Insulated Protective Cap. 25kV 250A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing inter faces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanent or temporary...
  • 15kV 200A Insulated Protective Cap

    15kV 200A Insulated Protective Cap

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 15/25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated...
  • 25kV 200A Insulated Protective Cap

    25kV 200A Insulated Protective Cap

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated P...
  • Cheap price 35kv 630a Bushing Insert - 24kV Loadbreak Elbow Surge Arrester – Anhuang

    Cheap price 35kv 630a Bushing Insert - 24kV Loadbreak Elbow Surge Arrester – Anhuang

    Anhuang specialized in Elbow Surge Arrester, we supply high quality Elbow Surge Arrester. Our products accord with IEEE386, and IEC standards. 34kV Surge Arrester Insert is widely used on medium voltage network, such as transformers switch gears and cable and other equipments. Product Structure 1.EPDM INSULATION: High quality sulfur cured EPDM insulation is mixed and formulated in-house for complete control of insulation rubber characteristics. 2.SEMI-CONDUCTIVE SHIELD: Molded semi-conducti...
  • Hot Selling for Elbow Connector - 25kV 200A Insulated Protective Cap – Anhuang

    Hot Selling for Elbow Connector - 25kV 200A Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards. 25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated P...
  • Best quality 1kv Heat Shrinkable Power Cable Terminal - Insulated Protective Cap – Anhuang

    Best quality 1kv Heat Shrinkable Power Cable Terminal - Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. General: 15kV/24kV 630A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanen...
  • Newly Arrival Disconnector Switch - 24kV 200A Rotatable Feedthru Insert – Anhuang

    Newly Arrival Disconnector Switch - 24kV 200A Rotatable Feedthru Insert – Anhuang

    Anhuang specialized in Rotatable Feedthru Insert,we supply high quality Rotatable Feedthru Insert. Our products accord with IEEE386, and IEC standards. Introduction: 24kV 200A Rotatable feedthrough insert is used to provide dual bushings from a single apparatus bushing well。 It makes converting radial-feed transformers to feed thru transformers and adding in-line arrester protection both easy and practical. Its patented, built-in torque limiting ratchet prevents operators from accidentally b...
  • Low MOQ for 24kv 250a Insulated Protective Cap - 25kV 250A extended Apparatus Bushing with skirt – Anhuang

    Low MOQ for 24kv 250a Insulated Protective Cap - 25kV 250A extended Apparatus Bushing with skirt – Anhuang

    Anhuang specialized in Lengthen Apparatus Bushing, we supply high quality Lengthen Apparatus Bushing. Introduction: 25kV 250A Apparatus Bushing provide the interface for the 200A Cable connector and mostly used on the oil-insulated (R-temp, hydrocarbon, or silicone) apparatus, including switchgear, transformers, and capacitors. The Apparatus Bushing are molded using high quality Epoxy Rubber, meet the requirement of standard EN50180/EN50181 DIN47636/HN52-S-61. Kit contents: ● Apparatus bushi...
  • Lowest Price for 12/24kv 630a Separable Elbow Connector - 15kV24kV 600A Dead break T Connecting Plug – Anhuang

    Lowest Price for 12/24kv 630a Separable Elbow Connector - 15kV24kV 600A Dead break T Connecting Plug – Anhuang

    Anhuang specialized in Deadbreak Tee plug, we supply high quality Deadbreak Tee pug Connector. General:  600A Dead break T Connector Plugs are used to connect two or more 600A dead break terminators. Dead break Connector plugs are typically used in a separable splice, or with a bushing extender, to increase the distance from the apparatus front plate to the 600A terminator, easing cable training. The Load break Elbows are molded using high quality sulfur-cured insulating and semi-conducting ...
  • Short Lead Time for Deadbreak Rear Connector - Insulated Protective Cap – Anhuang

    Short Lead Time for Deadbreak Rear Connector - Insulated Protective Cap – Anhuang

    Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. General: 15kV/24kV 630A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded, submersible insulating cover for energized bushings. The Insulated Protective Cap can be used for permanen...