35kV 630A T Cable Connector
Anhuang specialized in T Cable Connector, we supply high quality T Cable Connector.
35kV 630A T Cable Connector provides a fully screened and fully submersible connection when mated with the proper bushing or plug. For connection of polymeric cable to transformers, switch gear, motors, and other equipment with a remolded separable connector. Optional capacitance test point allows for an easy check of the circuit status or installation of a fault indicator. These 36kV 630A T Cable Connector are made by EPDM with the good quality.
● Deadbreak T Body
● Conductor cable lug
● Two head screw
● Clearing Paper
● Silicone Lubricant
● Installation Instruction Sheet
● Quality Certificate
1、Semi-conductive EPDM and controls electrical stresses at nose of mating load break product.
2、EPDM INSULATION: High quality sulfur cured EPDM insulation is mixed and formulated in-house for complete control of insulating rubber characteristics.
3、SEMI-CONDUCTIVE INSERT: Molded EPDM conducting rubber screen controls electrical stress.
4、GROUNDING EYE: Molded into the external screen for connection of an earthing wire.
5、STRESS RELIEF: The configuration of the outer screen and the cable adapter provide cable stress relief.
6、CONDUCTOR CABLELUG: Aluminum compression connector is sized to ensure a cool running connector with maximum current transfer.
7、INSULATING PLUG: Molded epoxy insulating plug provides excellent electrical, thermal and mechanical reliability.
8、TWO HEAD SCREW: To make sure have a good contact with the apparatus bushing. SEMI-CONDUCTIVE SHIELD INSERT: Semi-conductive insert is molded of semi
|Reference No.||Conductor Cross Section(mm²)||stretch range over insulation(mm)|
|Continuous nominal current||630A|
|24 hours overload||1000A|
|Dynamic short circuit||40kA/0.2s|
Continuous Voltage Ratings:
|Continuous operating voltage||35|
|Maximum Rating Phase-to-Phase||40.5|
|Maximum Rating Phase-to-ground||26|
|AC withstand voltage ,5min||117|
|DC withstand voltage, 15min||104|
|Impulse withstand voltage||200|
|Minimum Corona Voltage Level||26|