OEM Supply 15kv 600a Integral Deadbreak Bushing - 15Kv630ADeadbreak T Fore Connector – Anhuang

You can know every new products be published here, and witness our growth and innovation.

OEM Supply 15kv 600a Integral Deadbreak Bushing - 15Kv630ADeadbreak T Fore Connector – Anhuang
  • Product Details

  • Product Tags

Anhuang specialized in Deadbreak T Fore Connector, we supply high quality Dead break T Fore Connector.

Application:

●For connection of polymeric cable to transformers, switch gear, motors and other equipment with a pre-molded separable connector.
●For indoor and outdoor installations.
●System voltage up to 24 kV.
●Continuous current 630 A (900 A overload for 8 hours).
●Cable particulars:
– Polymeric cable (XLPE, EPR, etc.)
– Copper or aluminum conductors
– Semiconducting or metallic screens
– Conductor size 12kV 25-120 mm2 24kV 25-400 mm²

Features:

●Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.
●Can be used under the circumstances
●Built-in capacitance test point to determine the circuit status or install a fault indicator.
●No minimum phase clearance requirements.
●Mounting can be vertical, horizontal, or any angle in between.

Installation:

●When finish the installation of elbow connector, the power can be supply directly.
●According to the Installation Instruction Sheet
●(any other special requirement, please contact our sales engineer)
p5

Product structure:

1 TWO HEAD SCREW: To make sure have a good contact with the apparatus bushing.

2、INSULATION: Molded EPDM insulating rubber is formulated and mixed in-house to ensure high quality.

3、INSULATING PLUG: Molded epoxy insulating plug provides excellent electrical,thermal and mechanical reliability.

4、SEMI-CONDUCTIVE INSERT: Molded EPDM conducting rubber screen controls electrical stress.

5、STRESS RELIEF: The configuration of the outer screen and the cable adapter provide cable stress relief.

6、GROUNDING EYE: Molded into the extremal screen for connection of an earthing wire.

7、SEMI-CONDUCTIVE SHIELD: Molded EPDM conducting rubber mates with the cable screen to maintain screen continuity and ensure that the assembly is at earth potential.

8、CONDUCTOR CABLE LUG: Aluminum compression connector is sized to ensure a cool running connector with maximum current transfer.

Kit Contents:

● Front T body

● Insulate plug

● Sealing cap

● Adaptor (stress cone)

● Crimp connector

● Stud bolt

● Silicone

● Cleaning paper

(any other special requirement, please contact our sales engineer)

Reference No. Conductor Cross Section(mm²) stretch range over insulation(mm)  
AH QJ-12/630-25 25 16.6  
AH QJ-12/630-35 35 17.6  
AH QJ-12/630-50 50 19  
AH QJ-12/630-70 70 20.6  
AH QJ-12/630-95 95 22.2  
AH QJ-12/630-120 120 23.6  
AH QJ-12/630-150 150 25.2  
AH QJ-12/630-185 185 26.7  
AH QJ-12/630-240 240 29  
AH QJ-12/630-300 300 31.2  
AH QJ-12/630-400 400 34.4  
AH QJ-12/630-500 500 37.2  
Reference No. Conductor Cross Section(mm²) stretch range over insulation(mm)
AH QJ-24/630-35 35 18.6
AH QJ-24/630-50 50 19.6
AH QJ-24/630-70 70 21
AH QJ-24/630-95 95 22.6
AH QJ-24/630-120 120 24.2
AH QJ-24/630-150 150 25.6
AH QJ-24/630-185 185 27.2
AH QJ-24/630-240 240 28.7
AH QJ-24/630-300 300 31.1
AH QJ-24/630-400 400 33.2

Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at global@anhelec.com or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.