You can know every new products be published here, and witness our growth and innovation.
Date:11-19-2026
Let’s take a look at the 4 piece kit for American-style transformers.
First up: BWS-70 Thermometer Gauge.
Application:
The thermometer gauge is furnished to indicate the top liquid temperature in the tank in degrees Centigrade.
Use and maintenance:
The length of the thermometer pole inserted into the measured medium or sheath must longer than 100mm.
The thermometer pole without bent.
Tighten the compression bolt.
Regular inspection within 12 months
Mounting dimensions:
Next, we have the YSF Pressure Release Valve.
Application:
The valve mainly used to make the gas pressure in the container not exceed the
predetermined value, when higher than relief valve pressure, it will open, when less than relief valve pressure, it will close.
Technical:
Measuring range: P=0.03±0.01Mpa / P=0.06±0.01Mpa
Mounting thread: 1/4.18NPT
Temperature: 0℃~80℃
Humidity: < 9 5 %
Notice:
Use the raw material tape wrapped around the thread to ensure the sealing of the thread.
When pulling the pull ring, make sure the direction of the arrow shown in the figure, and keep the pull rod on the ring moving in the same straight line.
Mounting dimensions: