Ahtg3-24kv175X255X310 Epoxy Resin Wall Bushing

You can know every new products be published here, and witness our growth and innovation.

Ahtg3-24kv175X255X310 Epoxy Resin Wall Bushing
  • Product Details

  • Product Tags

Overview
The 24KV wall bushing is an epoxy resin APG process pressure gel molding structure, and the size of the external structure is 128 (100×100) mm and the height is 225 mm. It is mainly used in complete sets of equipment with a rated voltage of 10KV and below for insulation isolation and excessive connection. The casing is resistant to dirt and moisture, no special maintenance is required, and only the surface dirt is cleaned regularly. The busbar passes through the hole during installation.
Conditions of Use
1. Indoor installation;
2. The altitude does not exceed 1000M;
3. Ambient air temperature +40ºC~5ºC;
4. When the air temperature is +20ºC, the relative humidity will exceed 85%;
5. There is no place where gas, steam, dust and other explosive and corrosive media that seriously affect the insulation of the contact box.
Ahtg3-24kv175X255X310 Epoxy Resin Wall Bushing

 

Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at global@anhelec.com or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.